3D Printer Fume Extractor integrating HEPA 14 Filter, Activated Carbon and Monitoring

ALVEOPRO - M100

<p dir="ltr" id="isPasted">The ALVEOPRO – M100 is a compact, professional-grade fume extractor designed for 3D printing environments. It features a HEPA 14 filter with 99.92% efficiency for particles ranging from 10 to 200 nm, combined with optimized activated carbon to capture VOCs emitted during FDM or SLA printing. Designed for universal compatibility, it integrates with most 3D printers or enclosures using a flexible suction hose and adapter plates for 120mm and 90mm axial fans. The unit supports adjustable airflow from 10 to 80 m³/h, enabling coverage for up to four nozzles. Key features include a 2.8” LCD, PWM fan control, filter life monitoring, USB-based firmware updates, and real-time safety alerts. The system measures 200x200x225 mm and weighs 9 kg, with a filter lifespan of over 1500 hours. Its aluminum build and low-noise operation (40–60 dB) make it suitable for industrial and desktop setups requiring safe, continuous air purification.</p><h2 dir="ltr">Features of ALVEOPRO – M100</h2><h3 dir="ltr">Filtration System</h3><p dir="ltr">The ALVEOPRO – M100 incorporates a dual-stage filtration system designed for 3D printer emissions.&nbsp;</p><p dir="ltr"><img src="https://s3-us-west-1.amazonaws.com/wevolver-project-images/froala%2F1744876326000-image1.png" style="width: 100%px;" class="fr-fic fr-dib"></p><p dir="ltr">It utilizes a HEPA 14 filter, constructed from pleated fiberglass, which achieves a tested efficiency of 99.92% for nanoparticles ranging from 10 to 200 nm, specifically those emitted during Fused Deposition Modeling (FDM) with ABS filament. Complementing the HEPA filter is an activated carbon blend, optimized for capturing Volatile Organic Compounds (VOCs) produced by various 3D printing filaments and resins, including FDM and Stereolithography (SLA). The M100 filter is specified with a lifetime of over 1500+ hours.&nbsp;</p><h3 dir="ltr">Airflow Management</h3><p dir="ltr">The unit features a suction system with an adjustable airflow range of 10 to 80 m³/h.&nbsp;</p><p dir="ltr"><img src="https://s3-us-west-1.amazonaws.com/wevolver-project-images/froala%2F1744876347457-image5.png" style="width: 100%px;" class="fr-fic fr-dib"></p><p dir="ltr">This variable airflow allows adaptation to different printing volumes and the number of active nozzles, supporting up to four single-nozzle 3D printers or a single printer with up to four nozzles simultaneously. The system draws air from the top through an 80mm diameter inlet and expels it from the back. An expandable suction hose (0.8m to 3m) and connection plates for 120mm and 90mm axial fans are included for interface with various printer setups.</p><h3 dir="ltr">Electronic Features and Monitoring</h3><p dir="ltr">The embedded electronic system is managed through a 2.8” LCD display, offering control over features such as PWM fan speed, timers, and filter saturation monitoring.&nbsp;</p><p dir="ltr"><img src="https://s3-us-west-1.amazonaws.com/wevolver-project-images/froala%2F1744876361113-image2.png" style="width: 100%px;" class="fr-fic fr-dib"></p><p dir="ltr">A differential pressure sensor monitors filter status, issuing alerts if clogging or component failure is detected. Users can reset the filter life counter after replacements and perform firmware updates via USB to access new features or improve performance. The system also includes a standby mode and customizable settings based on print environment and nozzle configuration.</p><h3 dir="ltr">Safety and Usability Functions</h3><p dir="ltr">The M100 is equipped with error detection protocols, including visual and audible warnings in case of airflow irregularities or filtration failures.&nbsp;</p><p dir="ltr"><img src="https://s3-us-west-1.amazonaws.com/wevolver-project-images/froala%2F1744876381192-image3.png" style="width: 100%px;" class="fr-fic fr-dib"></p><p dir="ltr">Safety functions ensure the system can operate continuously without compromising air quality. The air inlet diameter of 80 mm, top suction design, and rear air outlet help maintain efficient airflow dynamics. Additionally, anti-vibration pads and a low noise level (40–60 dB) contribute to a stable and less intrusive operation in professional environments.</p><h3 dir="ltr">Physical Characteristics and Compatibility</h3><p dir="ltr">The ALVEOPRO – M100 has dimensions of 200mm x 200mm x 225mm and weighs 9 kg (excluding the filter, which weighs 1.2 kg).&nbsp;</p><p dir="ltr"><img src="https://s3-us-west-1.amazonaws.com/wevolver-project-images/froala%2F1744876404255-image6.png" style="width: 100%px;" class="fr-fic fr-dib"></p><p dir="ltr">The aluminum housing provides structural durability, and the device includes a semi-rigid expandable hose (0.8 to 3 m) for direct enclosure or printer mounting. The package includes the main unit, a 24V wall-mounted power supply, connection plates, the M100 filter, a USB cable, a 2.5mm hex key, and anti-vibration pads.</p><h2 dir="ltr">Applications</h2><p dir="ltr">The ALVEOPRO – M100 finds application in environments utilizing additive manufacturing technologies, specifically those employing material extrusion (FDM) and photopolymerization (SLA/DLP) processes. Its primary function is the mitigation of airborne particulate matter and gaseous emissions generated during these processes. The adjustable airflow allows for integration with various 3D printer sizes and configurations, including enclosed and open-frame systems, and can accommodate setups with multiple extruders.&nbsp;</p>

 ALVEOPRO – M100 Product Brief

Dimensions

Weight

Filter Type

Filter Efficiency

Filter Lifetime

Airflow

Display

Compatibility

Included Accessories

The ALVEOPRO – M100 is a compact, professional-grade fume extractor designed for 3D printing environments. It features a HEPA 14 filter with 99.92% efficiency for particles ranging from 10 to 200 nm, combined with optimized activated carbon to capture VOCs emitted during FDM or SLA printing. 

Dimensions	200 mm x 200 mm x 225 mm
Weight	9 kg (including filter)
Filter Type	HEPA 14 pleated fiberglass + Activated Carbon
Filter Efficiency	99.92% (Nanoparticles 10–200 nm)
Filter Lifetime	1500+ hours
Airflow	Adjustable from 10 to 80 m³/h