| project specification

eBee Classic

The vehicle has an ultra-light shock-absorbent construction and weighs 700g, minimising its impact energy. It features a safety-conscious rear-facing propeller and an autopilot, which manages a range of failsafe behaviours. The eBee can cover up to 12 km2 (4.6 mi2) in a single automated flight, while flights over smaller areas, flown at lower altitudes, can acquire images with a ground sampling distance (GSD) of down to 1.5 cm (0.6 in) per pixel.

remotely operated vehicles (ROVs) - unmanned aerial vehicles (UAVs)

Technical Specifications

Wingspan	96
Weight (inc. supplied camera & battery)	Approx. 0.69
Motor
Radio link range	3
Detachable wings
Camera
Cameras (optional

Software
Flight planning & control software (supplied)
Image processing software (optional)

Operation
Automatic 3D flight planning
Cruise speed	40-90
Wind resistance	45
Maximum flight time	50
Maximum coverage (single flight)	12
Automatic landing	Linear landing with ~ 5
Multi-drone operation	Yes
Ground control points (GCPs)	Optional
Oblique imagery	0 to -50

Overview

The eBee can cover up to 12 km2 (4.6 mi2) in a single automated flight, while flights over smaller areas, flown at lower altitudes, can acquire images with a ground sampling distance (GSD) of down to 1.5 cm (0.6 in) per pixel.

The eBee enables flight planning and management through it's eMotion software. The user chooses or creates a preferred background map. Then uses this to define the region they want to map. The desired ground resolution is specified (down to 1.5 cm / 0.6 inches per pixel) and the required image overlap is set. eMotion automatically generates a full flight plan, based on GPS waypoints, calculates the eBee’s required altitude and displays its projected trajectory. eMotion offers a confidence-building simulation mode. This virtual flight simulates wind strength and direction, allowing the user to make any flight plan enhancements needed before launch.

The eBee’s eMotion software displays the aircraft’s key flight parameters, its battery level and its image acquisition progress, in real time, while the artificial intelligence inside the eBee Ag’s autopilot continuously analyses onboard IMU and GPS data to control and optimise every aspect of the drone’s flight.